Gucai3d Filament Dry Box:
Working Temp.: 35-55℃
Gucai3d filament dry box is to prevent filament from absorbing moisture in the air, causing printing failure and nozzle clogging. In view of the high humidity weather in some areas or the filament are not used for a long time and are exposed to the air, in this case 3D printing filament are usually not stored for a long time, and will become humid and brittle over time. PLA and ABS are particularly susceptible to this problem because they are hygroscopic, which means they can easily try to absorb moisture from the air.
Gucai3d filament drying box solves this problem well by placing the filament in a dry box during printing and heating it quickly and evenly to dehumidify the filament!
Gucai3d filament storage box is suitable for filament of various diameters and can dry your filament quickly and evenly.
Description:
Quick start
Compatible with a variety of filament diameters (1.75mm / 2.85mm / 3mm)
Adjustable temperature range (35 to 55 degrees Celsius)
Dual temperature probes measure the temperature of the cabinet and the heating plate
Heating up quickly and evenly
Time function to set heating time
Can hold 2 rolls of 0.5kg filament, with 2 filament outlets for the filament to pass through
2-inch LCD display shows temperature and time
| Filament Dry box | |
| Product size | 271(L)*100(W)*237(H)mm |
| Max coil size | φ210*89（H）mm |
| Net weight of product | 980g |
| Filament diameter | 1.75/2.85/3.0mm |
| Working humidity | ≤90% |
| Working temp | 35℃~55℃ |
| Input power | AC 100V-240V, 50/60HZ |
| Output power | DC:24V±1.2V, 2A |
| Standby power | 0.05W |
| Max working electricity | 1.8A |
| Max working power | 48W |
| LCD screen size | 2 inch |
